Vertically Aligned CdO-Decked α-Fe2O3Nanorod Arrays by a Radio Frequency Sputtering Method for Enhanced Photocatalytic Applications

Abstract

Green hydrogen production is one of the most desirable sustainable goals of the United Nations. Thus, for that purpose, we developed hematite (α-Fe2O3), an n-type semiconductor, a desirable candidate for photoelectrochemical (PEC) water splitting, enabling hydrogen evolution. High recombination losses, low efficiency, and large-scale production hinder its potential. To address these issues, we have fabricated optimized bare and cadmium oxide (CdO)-decorated hematite thin film nanorod arrays using a throughput radio frequency (RF) sputtering with efficient water splitting behavior. To the best of our knowledge, no work has been done so far on the synthesis of CdO/α-Fe2O3via RF sputtering for PEC application. Bare α-Fe2O3samples, with a morphology of vertically aligned nanorods, were fabricated with optimized parameters such as as-deposited 70 nm of Fe, an angle of deposition of 70°, and an annealing temperature of 600 °C, which showed a photocurrent density of 0.38 mA/cm2at 1.65 V vs reversible hydrogen electrode (RHE). Characterizations depicted that this unique morphology with high crystallinity directly enhanced the performance of hematite photoanodes. Further, deposition of 30 nm of cadmium (CdO) on the α-Fe2O3nanorods produced a corn-like morphology with CdO nanoparticles (∼2 nm), resulting in 4-times enhancement of the PEC performance (1.2 mA/cm2at 1.65 V vs RHE). CdO acted as a co-catalyst, responsible for satisfactory suppression of recombination and facilitating the hole transfer, directly enhancing the overall photocurrent density. This photoanode showed an extremely stable behavior over a period of 26 h when kept under constant illumination. Furthermore, the CdO-modified photoanode showed a better dye degradation (98% in 40 min) than the bare hematite (60% in 40 min), proving to be an efficient photoanode.