Evaluation of rheological behavior, resistance to permanent deformation, and resistance to fatigue of asphalt mixtures modified with nanoclay and SBS polymer

Abstract

Fatigue cracking and rutting are among the main distresses identified in flexible pavements. To reduce these problems and other distresses, modified asphalt mixtures have been designed and studied. In this regard, this paper presents the results of a study on rheological behavior and resistance to permanent deformation and to fatigue of four different asphalt mixtures: (1) with conventional asphalt binder (CAP 50/70); (2) with binder modified by nanoclay (3% NC); (3) with binder modified by styrene-butadiene-styrene polymer (SBS 60/85); and (4) with binder modified by nanoclay and SBS (3% NC + 2% SBS). For this analysis, the mixtures were evaluated based on complex modulus, permanent deformation tests, and fatigue tests (4PB, in the four-point bending apparatus), with the subsequent application of numerical simulations. The results obtained show a better rheological behavior related to greater resistance to permanent deformation for the mixture 3% NC + 2% SBS, which could represent an alternative for roads where a high resistance to rutting is required. Otherwise, on fatigue tests, higher resistance was observed for the SBS 60/85 mixture, followed by the 3% NC + 2% SBS mixture. Nevertheless, based on the results of the numerical simulations and considering the possibility of cost reduction for the use of the 3% NC + 2% SBS mixture, it is concluded that this modified material has potential to provide improvements to the road sector around the world, especially in Brazil.