Tomographic imaging of reacting flows in 3D by laser absorption spectroscopy

Abstract

This paper describes the development of an infrared laser absorption tomography system for the 3D volumetric imaging of chemical species and temperature in reacting flows. The system is based on high-resolution near-infrared tunable diode laser absorption spectroscopy (TDLAS) for the measurement of water vapour above twin, mixed fuel gas burners arranged with an asymmetrical output. Four parallel laser beams pass through the sample region and are rotated rapidly in a plane to produce a wide range of projection angles. A rotation of 180° with 0.5° sampling was achieved in 3.6 s. The effects of changes to the burner fuel flow were monitored in real time for the 2D distributions. The monitoring plane was then moved vertically relative to the burners enabling a stack of 2D images to be produced which were then interpolated to form a 3D volumetric image of the temperature and water concentrations above the burners. The optical transmission of each beam was rapidly scanned around 1392 nm and the spectrum was fitted to find the integrated absorbance of the water transitions and although several are probed in each scan, two of these transitions possess opposite temperature dependencies. The projections of the integrated absorbances at each angle form the sinogram from which the 2D image of integrated absorbance of each line can be reconstructed by the direct Fourier reconstruction based on the Fourier slice theorem. The ratio of the integrated absorbances of the two lines can then be related to temperature alone in a method termed, two-line thermometry. The 2D temperature distribution obtained was validated for pattern and accuracy by thermocouple measurements. With the reconstructed temperature distribution, the temperature-dependent line strengths could be determined and subsequently the concentration distribution of water across the 2D plane whilst variations in burner condition were carried out. These results show that the measurement system based on TDLAS can be used for 2D temporal or 3D volume imaging of temperature and chemical species concentration in reacting flows.