Hydrogen production from methane dry reforming over nickel-based nanocatalysts using surfactant-assisted or polyol method

Abstract

In this study, two series of Ni-based nanocatalysts were synthesized successfully by the polyol and surfactant-assisted methods and subsequently tested for hydrogen production from CO2-CH4 reforming. Surfactant-assisted catalysts were prepared by using cetyl trimethyl ammonium bromide (CTAB) as a surfactant, whereas polyol catalysts were prepared in ethylene glycol (EG) medium with polyvinylpyrrolidone (PVP) as a nucleation-protective agent. The catalytic performance of each catalyst, in terms of H2 yield and selectivity, was evaluated at different temperatures (500-800 °C). In order to clarify and explain the differences in catalytic activities of catalysts, the prepared samples were characterized by various techniques, such as BET, H2-TPR, CO2-TPD, XRD, TGA, SEM, HRTEM and CO pulse chemisorption. The results demonstrated that the method of preparation had a significant effect on the catalytic performance of tested catalysts. Overall, polyol catalysts showed high activity and selectivity for hydrogen production, while surfactant-assisted catalysts exhibited a fairly high resistance towards carbon deposition under similar reaction conditions of dry reforming of methane. Moreover, due to the reverse water gas shift reaction (RWGS), surfactant-assisted catalysts always produced smaller values of H2/CO product ratio than their corresponding polyol catalysts.