100 GHz zinc oxide Schottky diodes processed from solution on a wafer scale

Abstract

Inexpensive radio-frequency devices that can meet the ultrahigh-frequency needs of fifth- and sixth-generation wireless telecommunication networks are required. However, combining high performance with cost-effective scalable manufacturing has proved challenging. Here, we report the fabrication of solution-processed zinc oxide Schottky diodes that can operate in microwave and millimetre-wave frequency bands. The fully coplanar diodes are prepared using wafer-scale adhesion lithography to pattern two asymmetric metal electrodes separated by a gap of around 15 nm, and are completed with the deposition of a zinc oxide or aluminium-doped ZnO layer from solution. The Schottky diodes exhibit a maximum intrinsic cutoff frequency in excess of 100 GHz, and when integrated with other passive components yield radio-frequency energy-harvesting circuits that are capable of delivering output voltages of 600 mV and 260 mV at 2.45 GHz and 10 GHz, respectively.