Mechanical Properties and Vibrational Behavior of 3D-Printed Carbon Fiber-Reinforced Polyphenylene Sulfide and Polyamide-6 Composites with Different Infill Types

Abstract

The aim of the present study is to investigate the performance of two carbon fiber-reinforced composite polymers used to manufacture end-use parts via the fused filament fabrication (FFF) method. The materials under investigation were carbon fiber-reinforced Polyamide-6 (PA6-CF15) and carbon fiber-reinforced polyphenylene sulfide (PPS-CF15). To evaluate their mechanical properties and vibrational behavior, specimens were fabricated with four distinct infill patterns: grid, gyroid, triangle and hexagon. In particular, the vibrational behavior of the 3D-printed composites was determined by conducting cyclic compression testing, as well as modal tests. Additionally, the mechanical behavior of the reinforced polymers was determined by conducting both uniaxial tensile and compression tests, as well as three-point bending tests. The results of the mechanical experiments revealed that the grid pattern exhibited the best overall performance, while the gyroid pattern exhibited the greatest strength-to-weight ratio, making it the most durable infill for use with composite filaments. In vibration experiments, PA6-CF15 structures exhibited higher damping ratios than PPS-CF15, indicating superior damping capacity. Among the infill patterns, the hexagon pattern provided the greatest vibration isolation performance.