Abstract
In this study, the production of bio-oil by pyrolysis with microwave (MW) heating was tested experimentally. Two magnetrons with a total MW power of 1,600 W were used in the pyrolysis setup. The electric field strength was 185.38 V·m-2 at an MW frequency of 2.45 GHz. Cashew nut shells (CNS) or Cassia fistula pods (CFP) were pyrolyzed at 400°C, 500°C, or 600°C, with biomass-to-activated carbon ratio set at 70:30, 80:20, or 90:10. The largest yield of bio-oil was found for CNS at 600°C, and for CFP at 500°C, both with 90:10 ratio, achieving, respectively, 20.0% and 15.8% yields. When the bio-oil yields from CNS and CFP at 90:10 ratio and 400-600°C were analyzed with gas chromatograph-mass spectrometer, the components found included acids, esters, ketones, furans, pyrans, guaiacol, syringol and phenols, and phenolic derivatives were the dominant type of compounds. There were 23.56% and 13.23% phenolic derivatives, respectively, in the bio-oils from CNS (at 500°C) and from CFP (at 400°C). An analysis with Folin-Ciocalteu reagent of the phenolic contents in bio-oils gave the respective ranges 146.83-164.83 mg·GAE·g·DW-1 and 39.34-45.91 mg·GAE·g DW-1 for CNS and CFP (both run with 90:10 ratio).
Author supplied keywords
Cite
CITATION STYLE
Waitongkham, R., Pianroj, Y., Punvichai, T., Karrila, S., Chumkaew, P., & Jumrat, S. (2023). Characterization of bio-oil production by microwave pyrolysis from cashew nut shells and Cassia fistula pods. Green Processing and Synthesis, 12(1). https://doi.org/10.1515/gps-2023-0084
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.