Exploring the Potential of Potato Peels for Bioethanol Production through Various Pretreatment Strategies and an In-House-Produced Multi-Enzyme System

Abstract

This study aimed to explore the viability of converting potato peel waste into bioethanol using a custom-produced multi-enzyme preparation. Various pretreatment approaches were employed on the potato peels, including thermal, chemical, and thermo-chemical methods. These methods involved boiling for 30 and 60 min, steaming at different pressures and durations, and applying different concentrations of chemicals, including H2SO4, HNO3, CH3COOH, HCl, NaOH, Ca(OH)2, KOH, NH3, and H2O2, either individually or in combination with steam treatment. The pretreated potato peels were subsequently subjected to enzymatic hydrolysis using a crude multi-enzyme cocktail obtained from solid-state fermentation of wheat bran by a naturally occurring strain of Aspergillus niger P-19. This enzyme cocktail consisted of cellulases, hemicellulases, pectinase, and amylases. The most effective pretreatment combination involved the use of 3% H2SO4 followed by steam treatment under pressure, and enzymatic hydrolysis utilizing the crude multi-enzyme preparation. This combination resulted in the highest concentration of reducing sugars (141.04 ± 12.31 g/L), with a carbohydrate conversion rate of 98.49% when a substrate loading of 20% was used. As a result, an ethanol yield of 43.2 ± 3.82 g/L, representing 21.6% based on dry matter, was achieved. Furthermore, supplementing the medium with peptone, (NH4)(H2PO4), and ZnSO4 at a concentration of 0.1% w/v each, along with solid loadings of 22% and 24%, respectively, achieved yield improvements of 51.67 g/L and 54.75 g/L. However, the maximum productivity of 23.4% was observed with a 22% loading, compared to a yield of 22.8% with a 24% solid loading, based on dry matter.