Experimental Research and Theoretical Analysis of the Coupling Mechanism Between Microstructure and Acoustics in Porous Materials

Abstract

Based on the three-parameter approximate JCAL analytical model (hereinafter referred to as the three-parameter model), this study conducted an in-depth analysis of the effects of porosity, median pore size, and pore size standard deviation on the acoustic performance of porous materials and developed a composite porous material composed of glass fibers and zeolite particles. Experimental results indicate that the pore size distribution significantly affects the acoustic performance of fibrous porous sound-absorbing materials. Specifically, smaller pores lead to better sound absorption at mid–low frequencies, with the optimal sound absorption performance observed when the median pore size is between 60 and 80 μm. Increasing the material density and decreasing the fiber diameter help reduce the internal pore size, thereby improving the material’s sound absorption performance. Additionally, the appropriate addition of zeolite can further optimize the internal pore size and effective sound-absorbing interface, thus enhancing the material’s sound absorption performance. When the material density is 120 kg/m3 and the zeolite substitution rate is around 10%, the material exhibits the best acoustic performance, with a noise reduction coefficient (NRC) reaching 0.65, which is a 10.17% increase compared to the material without zeolite. Comparing the simulation data from the three-parameter model with the actual measurement data shows that the model has excellent predictive performance for the sound absorption coefficient (SAC) of single-fiber porous materials (with an error of approximately 5%). However, for composite porous materials, due to the complex changes in interfaces, there is a certain prediction error (with the maximum error reaching 12.81%), indicating that the model needs further optimization and correction when applied to composite materials.