Power Generation on a Bare Electrodynamic Tether during Debris Mitigation in Space

Abstract

Power generation can be realized in space when current is induced on a bare electrodynamic tether system. The performance of power generation is discussed based on a debris mitigation mission by numerical simulation in the paper. A Li-ion battery subsystem is used to complete the energy conversion - harvest and supply the energy. The battery can provide 10-300 W average electric power continuously during several hundred hour mission time. The energy conversion efficiency ranges from 1% to a maximum value 30%. With constant power consumption on board, the battery operation generally experiences a discharging phase, a charging phase, and a stable phase. The first two phases determine the mission risk coefficient. The heating problem in the stable phase cannot be ignored. The optimization of battery design and tether design should be considered for each debris mitigation mission. An extra control circuit or small battery voltage with large capacity for battery design is suggested to eliminate the stable phase. Wide or long tether designs are more appropriate for mission with high or low power demands on board, respectively. The power generation is affected by the system mass and the mission orbit parameters.