Estimation of Particulate Emission Generation in Palm Oil Mill Boiler

Abstract

The palm oil industries in Malaysia has been positively growth throughout the year, for it sustainable approach in terms of production and environmental protection. However, this industry also producing considerable amount of particulate emission from the process of burning its biomass waste of palm fibre and shell in the boiler. This study present a method to estimate the particulate emission that are being generated from the boiler. The method were done by analyzing the proximate analysis value of the ash content of palm fibre and shell found in this study. The particulate emission were physically collected from five palm oil mill boilers with boiler capacity ranging from 18-45 tonne/hour. The particulate stack fly ash was collected from the stack gas downstream of a multi-cyclones particulate arrestor according to the USEPA Method 17-Determination of particulate matter emissions from stationary sources. Meanwhile the sample of palm fibre and shell were collected to determine the proximate value. The estimation were then being further analyzed according to the particulate emission that were obtained by the real-stack sampling. In summary, the average moisture content, ash content, volatile matter and fixed carbon for palm shell found in this study are 19.3 ± 5.7%, 2.79 ± 2.2%, 74.3 ± 3.0, and 11.3 ± 4.3, respectively.). The average particulate concentration for these five mills is 2.2±0.9g/Nm3 and the air pollution control requirement are between 64 and 96% with reference to Clean Air Regulations 2014 of 0.15g/Nm3 which is very high to be achieve. It also can be estimated that 26% of the ash generated from the combustion of palm fibre and shell in palm oil mill boiler are being released at the stack.