Study of ferroelectric characteristics of Hf0.5Zr0.5O2thin films grown on sputtered or atomic-layer-deposited TiN bottom electrodes

Abstract

Ferroelectric Hf0.5Zr0.5O2 (HZO) films were grown by the atomic layer deposition (ALD) technique on an ALD or physical-vapor-deposited (PVD, sputtering) TiN bottom electrode (BE). The PVD TiN film showed small grains with flat surface morphology, mainly consisting of the (111) crystallographic plane. In contrast, the ALD TiN film exhibited a larger diameter and faceted grain shapes, with the (200) crystallographic surface planes. The 10-nm-thick HZO film on the ALD TiN BE showed a lower internal field, enhanced endurance (>1 × 1010 cycle at 2.5 MV/cm), and decreased leakage current than identical HZO films on the PVD TiN BE. Lower interfacial oxidation of the ALD TiN BE as a result of the smaller grain boundary area of the ALD TiN induced a lower defect density in the HZO film. The higher work function of the ALD TiN film also contributed to the lowering of the leakage current.