Performance of an on-sitewastewater treatment system using reactive filter media and a sequencing batch constructed wetland

Abstract

Many on-site wastewater treatment systems, such as soil treatment systems, are not sustainable in terms of purification efficiency, nutrient recycling potential, and economics. In this case study, a sequencing batch constructed wetland (SBCW) was designed and added after a package treatment plant (PTP) using reactive filter media for phosphorus (P) removal and recycling. The treatment performance of the entire system in the start-up phase and its possible applicability in rural areas were investigated. Raw and treated effluents were sampled during a period of 25 weeks and analyzed for nitrogen, phosphorus, BOD7, and bacteria. Field measurements were made of wastewater flow, electrical conductivity, oxygen, and temperature. The entire system removed total-P and total inorganic nitrogen (TIN) by 83% and 22%, respectively. High salt concentration and very low wastewater temperature were possible reasons for these unexpectedly low P and TIN removal efficiencies. In contrast, removal rates of bacteria (Escherichia coli, enterococci) and organic matter (as BOD) were high, due to filtration in the alkaline medium Polonite® (Ecofiltration Nordic AB, Stockholm, Sweden) and the fine sand used as SBCW substrate. High pH in effluent from the PTP was efficiently reduced to below pH 9 in the SBCW, meeting recommendations by environmental authorities in Sweden. We concluded that treating cold on-site wastewater can impair treatment performance and that technical measures are needed to improve SBCW performance.