Improved optical and electrical properties for heterojunction solar cell using Al2O3/ITO double-layer anti-reflective coating

42Citations
Citations of this article
44Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Silicon heterojunction solar cells have been gaining remarkable attention in the photovoltaic industry in recent years owing to their low temperature coefficient and high efficiency. This study aimed to maximize the short circuit current density (Jsc), which is directly correlated with the absorbance of the solar cells. An advanced ray tracking model and hall effect measurement was used to improve the optical properties of Al2O3/ITO as a double-layered anti-reflection coating (DLARC) on the solar cell. RF/DC power sputtering system was used to deposit ITO layer, while atomic layer deposition was used to deposit Al2O3 on ITO to create a DLARC. An average decrease in reflection from 9.33% to 4.74% and enhancement in EQE from 76.89% to 84.34% were observed for the DLARC in the wavelength spectrum at 300–1100 nm. It also exhibited a higher Jsc value of 41.13 mA/cm2 and maximum conversion efficiency of 21.6%. The findings of both simulation and experiments showed that the Al2O3/ITO DLARC has better anti-reflection properties than a single-layer ITO coating.

Cite

CITATION STYLE

APA

Zahid, M. A., Khokhar, M. Q., Cui, Z., Park, H., & Yi, J. (2021). Improved optical and electrical properties for heterojunction solar cell using Al2O3/ITO double-layer anti-reflective coating. Results in Physics, 28. https://doi.org/10.1016/j.rinp.2021.104640

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free