Optimisation of process parameters in Arburg Plastic Freeforming for enhanced part density and geometric accuracy

Abstract

Technological advances have increased the use of plastic-based additive manufacturing for production in a variety of industries that require high mechanical properties while maintaining geometric precision. The Arburg Plastic Freeformer (APF) process, unlike other filament-based technologies, uses standard plastic granules used in mass production in injection moulding machines. This study focuses on optimising the interaction of three critical process parameters: layer thickness (LT), droplet aspect ratio (DAR) and discharge rate (DR). Previous studies have mainly varied individual parameters to evaluate mechanical and geometrical properties. In contrast, this work analyses these parameters as a whole and evaluates their combined effects on residual porosity and geometric accuracy. APF relies heavily on supports to sustain the printed part, with a smaller achievable self-supporting overhang angle compared to the Fused Filament Fabrication (FFF) printing process. For this reason, this study investigates two compatible materials, ABS Terluran GP35 and a water-soluble PVP compound named Armat11. Cylindrical and cubic samples were 3D printed using different combinations of LT, DAR and DR. A total of 150 cubic samples were printed to assess the geometric dimensional accuracy and repeatability of printing in the plate position using permutations in the printing plate. Subsequently, 30 cylindrical samples were printed for micro-CT analysis, reconstructed by CT file segmentation and compared with the ideal CAD model, in addition to the characterisation of residual porosity. The results show that optimal combinations of LT, DAR and DR produce high density parts with repeatable geometric properties. In addition, a quantitative analytical model was developed to optimise arbitrary parameter sets. This comprehensive investigation provides important insights into the APF process and increases its potential for wider industrial applications.