Study of Loads Acting on the Load during the Sudden Braking of a Vehicle

Abstract

This article presents the results of a study of the braking process in terms of assessing the longitudinal loading condition of transported cargo. The existing methods of securing cargo do not take into consideration the type of vehicle used to transport the cargo. This may result in cargo not being transported in compliance with the principles of proper cargo protection. This paper discusses the differences in maximum deceleration values achieved by different types of vehicles that are structurally suitable for freight transport. As a result of these differences in deceleration values, the values of forces acting on the transported cargo are also different. This paper presents and analyses the results of road tests that entailed the heavy braking of two vehicles structurally suitable for freight transport. One of them was a delivery vehicle, while the other was a semi-trailer truck. The experiment was carried out in six measurement series. Four of them were performed on an asphalt pavement, while the other two on a concrete pavement. One series included ten brake tests. Deceleration values registered during the tests were later used to determine the values of coefficient Cx, which were then compared with standardised values. It has been shown that failure to take into account in the selection process of cargo securing equipment, vehicle category, and type and condition of the pavement can result in cargo displacement and even traffic incidents.