On temperature dependence of microstructure, deformation mechanisms and tensile properties in austenitic Cr-Mn steel with ultrahigh interstitial content C + N = 1.9 mass.%

Abstract

The microstructure, deformation mechanisms, tensile properties and fracture micromechanisms of ultrahigh-interstitial austenitic Fe-22Cr-26Mn-1.3V-0.7C-1.2N (mass.%) steel were investigated in wide temperature interval. After conventional homogenization and solid-solution treatment, the steel possesses complex hardening which includes grain boundary, solid-solution and dispersion strengthening. In the temperature interval of −60 to +60◦ C, steel demonstrates striking temperature dependence of a yield strength which could be enhanced by the increase in solid-solution treatment temperature. The variation in test temperature does not change the dominating deformation mechanism of the steel, dislocation slip and insufficiently influences tensile elongation and fracture micromechanisms. The insignificant increase in the fraction of brittle cleavage-like component on the fracture surfaces of the specimens in low-temperature deformation regime is promoted by increase in planarity of dislocation arrangement and the gaining activity of mechanical twinning. In high-temperature range (200–300◦ C) of deformation, a negative strain-rate dependence, serrations on the stress-strain diagrams and improved strain-hardening associated with a dynamic strain aging phenomenon have been observed.