Fabrication and Characterization of Hybrid Photovoltaic Devices Based On N-Type GaAs and Polymer Composites

Abstract

Hybrid organic/inorganic solar cells have been fabricated and studied. The aim being to take advantage of the beneficial properties of both organic and inorganic materials. In this work we studied hybrid n-GaAs/Polymer photovoltaic devices and the effects of adding either carbon nanotubes or graphene into the polymer layer (either poly (3,4-ethyldioxythiophene):poly (styrenesulfunate) (PEDOT:PSS) or polyaniline (PANI)) to enhance its conductivity. We also investigated the use of two different metals (Al or Ag) as the anode electrode material to determine the influence of metal atoms migrating into the polymer layer on solar cell efficiency. The devices with the structure Al/PEDOT:PSS:MWCNT/n-GaAs/Au:Ge/Ni/Au exhibited the best performance, with a short circuit current (Jsc) of 28.6 mA/cm2 , an open circuit voltage (Voc) of 0.51 V, a fill factor (FF) of 29.8% and a power conversion efficiency (PCE) of 4.41% which is higher than other inorganic/organic hybrid devices reported in the literature. Based on optical absorption measurements and SEM analysis the solar cell performances reported here can mainly be attributed to photon absorption in both the doped PEDOT:PSS and the GaAs layers resulting in an increase of electron-hole pairs and improved the efficiency of the solar cells containing PEDOT:PSS in comparison with those containing PANI.