Early flame development image comparison of low calorific value syngas and CNG in di SI gas engine

1Citations
Citations of this article
5Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The early flame development stage of syngas and CNG are analysed and compared from the flame images taken over 20° CA from the start of ignition. An imitated syngas with a composition of 19.2% H2, 29.6% CO, 5.3% CH4 and balance with nitrogen and carbon dioxide, which resembles the typical product of wood biomass gasification, was used in the study. A CCD camera triggered externally through the signals from the camshaft and crank angle sensors was used in capturing of the images. The engine was accessed through an endoscope access and a self-illumination inside the chamber. The results of the image analysis are further compared with the mass fraction burn curve of both syngas and CNG analysed from the pressure data. The analysis result of the flame image of syngas validates the double rapid burning stage of the mass fraction burn of syngas analysed from in-cylinder pressure data. © Published under licence by IOP Publishing Ltd.

Cite

CITATION STYLE

APA

Hagos, F. Y., Aziz, A. R. A., & Sulaiman, S. A. (2013). Early flame development image comparison of low calorific value syngas and CNG in di SI gas engine. In IOP Conference Series: Earth and Environmental Science (Vol. 16). Institute of Physics Publishing. https://doi.org/10.1088/1755-1315/16/1/012070

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free