An Accelerometer Based on All Silica In-Line Fiber Fabry-Perot Etalon for High Temperature up to 800 °C

Abstract

High-temperature accelerometers have been widely used in aerospace, nuclear reactors, automobile technologies, etc. In this paper, a fiber-optic Fabry–Perot accelerometer (FOFPA) with a cantilever beam for high temperature is designed and experimentally demonstrated. The FOFPA is formed by bonding an all-silica in-line fiber Fabry–Perot etalon (ILFFPE) to one surface of the uni-form cantilever beam with the lumped mass at the free end for acceleration measurement. The all silica in-line fiber FP etalon is made by welding two gold-coat single-mode fiber (GSMF) and a hol-low silica glass tube (HST). The research results indicate that the sensitivity of the FOFPA is 0.02328rad/g, and the resonance frequency is 1146.6 Hz in the range of 1 g ~ 10 g. The high-temper-ature performance of the FOFPA was also evaluated. From 20 °C to 800 °C, the temperature drift is about 0.3178 nm/°C. The FOFPA has the potential of being applicable in higher temperatures com-pared to conventional accelerometers.