Coefficient of friction between Carboxymethylated Hyaluronic acid-based polymer films and the ocular surface

Abstract

PURPOSE. Hyaluronic acid–based polymer films are emerging as drug-delivery vehicles for local and continuous drug administration to the eye. The highly lubricating hyaluronic acid increases comfort, but displaces films from the eye, reducing drug exposure and efficacy. Previous studies have shown that careful control of the surface interaction of the film with the eye is critical for improved retention. METHODS. In this study, the frictional interaction of a carboxymethylated, hyaluronic acid– based polymer (CMHA-S) with and without methylcellulose was quantified against ovine and human sclera at three axial loads (0.3, 0.5, and 0.7 N) and four sliding velocities (0.3, 1.0, 10, and 30 mm/s). RESULTS. Static coefficients of friction significantly increased with rate (P < 0.003), ranging between 0.18 ± 0.08 and 0.46 ± 0.13 for 0.3 to 30 mm/s, respectively. Friction became more rate-dependent when methylcellulose was added to CMHA-S. Kinetic coefficient of friction was not affected by rate, and averaged 0.15 ± 0.1. Methylcellulose increased CMHA-S static and kinetic friction by 60% and 80%, respectively, but was also prone to wear during testing. CONCLUSIONS. These data suggest that methylcellulose can be used to create a friction differential on the film, but a potentially increased degradation rate with the methylcellulose must be considered in the design.