Interface pressure at different degrees of backrest elevation with various types of pressure-redistribution surfaces

Abstract

Background: Increased elevation of the head of the bed is linked to a higher risk for sacral pressure ulcers. A semirecumbent position of at least 30° is recommended for the prevention of ventilator-associated pneumonia in patients treated with mechanical ventilation. Therefore, prevention of pressure ulcers and prevention of pneumonia seem to demand contradictory, possibly incompatible, positioning. Objectives: To measure pressure at the interface between sacral skin and the supporting surface in healthy volunteers at different degrees of upright position with different types of mattresses. Methods: An open, prospective, randomized crossover trial was conducted with 20 healthy volunteers. Interface pressure was measured by using a pressure mapping device with the participant in a supine position at 0, 10°, 30°, and 45° elevation and in the reverse Trendelenburg position at 10° and 30°. Four types of mattresses were examined: 2 different foam mattresses and 2 air suspension beds, 1 of the latter with low-air-loss technology. Results: Peak sacral interface pressures increased significantly only at 45° of backrest elevation (P< .001). A mattress system with low-air-loss technology significantly reduced peak interface pressures at all angles (P < .001).The reverse Trendelenburg position led to lower peak pressures for all positions (P = .01). Conclusions: Backrest elevation up to 30° might be a compromise between the seemingly incompatible demands of skin integrity and the prevention of ventilator-associated pneumonia. The reverse Trendelenburg position and a mattress system with low-air-loss technology could be additional useful tools to help prevent skin breakdown at the sacrum. © 2014 American Association of Critical-Care Nurses.