Evolution of near-surface deformed layers on AA3104 aluminium alloy

Abstract

The present work studied the microstructure of near-surface deformed layers and their evolution from the transfer slab to the cold rolled final gauge sheet of an AA3104 aluminium alloy. Electron microscopy of ultramicrotomed cross-sections revealed two types of near-surface deformed layers, i.e. type A and type B, both with different microstructures to the underlying bulk alloy. A typical feature of the deformed layers is the nano-sized ultrafine grains, with diameters ≤ 200 nm for the type A and ≤ 500 nm for the type B deformed layer. Electron energy loss spectroscopy (EELS) indicated that oxide particles are present along grain boundaries within the type A deformed layer, while the type B deformed layer is free of oxide particles. The type A deformed layer is mainly generated at elevated temperatures during the early stages of hot rolling. Its thickness is non-uniform across the surface, with a maximum of ~4 μm on the transfer slab, ~1 μm on the re-roll gauge sheet and ~0.8 μm on the final gauge sheet. While the surface of the hot rolled sheet is mainly covered by the type A deformed layer, the surface undergone cold rolling is alternately covered by the type A and the type B deformed layers. © (2013) Trans Tech Publications, Switzerland.