Heat-emission analysis of small combustion equipments for biomass

Abstract

The article addresses the urgent questions regarding the use of biomass as a fuel for combustion equipment of the heat output up to 25 kW. The article is based on the determined elemental analyses of six samples of fuel taken both from the wood mass and herbaceous biomass. Tese samples underwent the stoichiometric analysis of fuels. After the stoichiometric analysis the heat-emission characteristics were determined on two combustion equipments. The results of carried out elemental and stoichiometric analyses indicate higher values of nitrogen, sulphur and chlorine concentration in herbaceous biomass from agriculture compared to the analyzed wood mass. The selection of combustion equipment is particularly influenced by increased contents of sulphur and chlorine (corrosive behaviour). The net calorific value of the analyzed samples taken from the wood mass is higher than of samples taken from the herbaceous biomass. The net calorific value of fuels from herbaceous biomass is reduced due to a higher content of ashes in the fuel. The results of thermal-emission analyses show higher values of nitrogen oxides, sulphur and chlorine concentrations in the herbaceous biomass compared to the analyzed wood mass. The emission concentrations of carbon monoxide for wood fuels and herbaceous biomass also depend on the type of combustion equipment and setting of combustion air volume. The increased emissions of hydrogen chloride generated by various combustion equipments are primarily caused by the volume of combustion air and the amount of chlorine in the fuel itself. The higher the volume of combustion air brought into the combustion chamber is, the higher the emissions of hydrogen chloride are. Based on the analyses we can also draw a conclusion that the spaces of combustion equipment during combustion should be most burdened with the herbaceous biomass.