Abstract
The sensitivity of semiconductor photodetectors is limited by photocarrier recombination during the carrier transport process. We developed a new photoactive material that reduces recombination by physically separating hole and electron charge carriers. This material has a specific detectivity (the ability to detect small signals) of 5 × 10 17 Jones, the highest reported in visible and infrared detectors at room temperature, and 4-5 orders of magnitude higher than that of commercial single-crystal silicon detectors. The material was fabricated by sintering chloride-capped CdTe nanocrystals into polycrystalline films, where Cl selectively segregates into grain boundaries acting as n-type dopants. Photogenerated electrons concentrate in and percolate along the grain boundaries - a network of energy valleys, while holes are confined in the grain interiors. This electrostatic field-assisted carrier separation and percolation mechanism enables an unprecedented photoconductive gain of 10 10 e - per photon, and allows for effective control of the device response speed by active carrier quenching.
Cite
CITATION STYLE
Zhang, Y., Hellebusch, D. J., Bronstein, N. D., Ko, C., Ogletree, D. F., Salmeron, M., & Alivisatos, A. P. (2016). Ultrasensitive photodetectors exploiting electrostatic trapping and percolation transport. Nature Communications, 7. https://doi.org/10.1038/ncomms11924
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.