GaN-based MIS-HEMTs with Al2O3 dielectric deposited by low-cost and environmental-friendly mist-CVD technique

16Citations
Citations of this article
21Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

We report on the fabrication and characterization of AlGaN/GaN metal-insulator-semiconductor (MIS) capacitors and high-electron-mobility transistors (MIS-HEMTs) using a 5 nm thick Al2O3 dielectric deposited by cost-effective and environmental-friendly mist chemical vapor deposition (mist-CVD) technique. Practically hysteresis-free capacitance-voltage profiles were obtained from the fabricated two-terminal MIS-capacitors indicating high quality of the mist-Al2O3/AlGaN interface. Compared with reference Schottky-gate HEMTs, mist MIS-HEMTs exhibited much improved performance including higher drain current on-to-off ratio, much lower gate leakage current in both forward and reverse directions and lower subthreshold swing. These results demonstrate the potential and viability of non-vacuum mist-CVD Al2O3 in the development of high-performance GaN-based MIS-HEMTs.

Cite

CITATION STYLE

APA

Low, R. S., Asubar, J. T., Baratov, A., Kamiya, S., Nagase, I., Urano, S., … Yatabe, Z. (2021). GaN-based MIS-HEMTs with Al2O3 dielectric deposited by low-cost and environmental-friendly mist-CVD technique. Applied Physics Express, 14(3). https://doi.org/10.35848/1882-0786/abe19e

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free