On the Use of Metal Sinter Powder in Laser Powder Bed Fusion Processing (PBF-LB/M)

Abstract

Metal Laser Powder Bed Fusion (PBF-LB/M Powder Bed Fusion, Laser-Based/Metal) offers decisive advantages over conventional manufacturing processes. Complex geometries can be produced that cannot, or only to a limited extent, be manufactured with conventional manufacturing processes. One of the main disadvantages of the process are high investment and operating costs. In order to make the PBF-LB/M process accessible to new research areas, the costs need to be reduced. Therefore, this work investigates whether laser beam sources and motion systems in currently established PBF-LB/M systems can be replaced by more cost-effective components. To reduce the operating costs for PBF-LB/M, the studies are carried out based on previous work with water-atomized, process-foreign sinter powder instead of gas-atomized, spherical PBF-LB/M powders. A cost-efficient, low-alloyed powder is selected (Höganäs HP1) and processed on two different PBF-LB/M machines with a restricted process window using process parameter values that current low-cost machines can achieve. The results show that a multimode fiber laser leads to a more stable process and wider melt pools compared to a single mode fiber laser. In addition, a lower sensitivity of the process with respect to modified process parameters is observed for the multimode laser, resulting in a wider range of stable process windows. A Cartesian motion system (gantry) is suitable for use in PBF-LB/M despite lower scan speeds compared to galvanometer scanners. Beam guidance in the XY-plane offers new possibilities for machine and process design that are not possible with usual scanner systems.