Retainment of the antimicrobial agent triclosan in a septic tank

0Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

Abstract

Laboratory experiments were conducted to investigate the fate of the antimicrobial agent triclosan (TCS) in a conventional septic tank. The main mechanism of TCS removal from wastewater was identified to be rapid TCS sorption to suspended particles followed by settling of these particles to the bottom of the septic tank. Sorption to particles was completed within minutes while the settling took several days. Therefore, in a septic tank the removal of TCS from wastewater is mainly determined by the removal of suspended particles by sedimentation. Over 5 days of hydraulic residence time the initial dissolved TCS concentration of 100 μg L-1 was reduced by 87 ± 8%. During the first 24 hours, 66-86% of all removed TCS was retained, whereas during the remainder of the experiment a slight but steady decrease in TCS concentration was observed. This was most likely caused by TCS diffusion and its subsequent sorption onto the septic sludge. © IWA Publishing 2014.

Cite

CITATION STYLE

APA

Kirjanova, A., Rimeika, M., Vollertsen, J., & Nielsen, A. H. (2014). Retainment of the antimicrobial agent triclosan in a septic tank. Water Science and Technology, 70(4), 586–592. https://doi.org/10.2166/wst.2014.271

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free