Corrosion and Anodizing Behavior of T 1 (Al 2 CuLi) Precipitates in Al-Cu-Li Alloy

Abstract

© The Author(s) 2019. Published by ECS. T1 (Al2CuLi) phase precipitates, the main strengthening precipitates in third generation aluminum-copper-lithium (Al-Cu-Li) alloys, play a critical role in determining the corrosion behavior of these alloys. Herein, the T1 precipitates, sufficiently large to be visualized by scanning electron microscopy,were intentionally grown in a commercial Al-Cu-Li alloy through a high temperature annealing process. The corrosion and anodizing behavior of the alloy associated with individual T1 precipitate plates was subsequently investigated. It was observed that corrosion initiated instantaneously on T1 precipitate plates when the alloy was exposed to laboratory air. When immersed in NaCl solution, T1 precipitate plates corroded through a dealloying process and then, drove anodic dissolution of the adjacent aluminum alloy matrix by forming copper-rich nanoparticles at the sites of dealloyed T1 precipitates. The T1 phase precipitates were anodized relatively faster than the aluminum matrix in tartaric-sulfuric acid solution under a constant voltage of 14 V. The anodic film formed from T1 precipitates was dissolved quickly by the anodizing electrolyte during anodizing at relatively higher temperatures, resulting in cavities of sizes similar to those of T1 precipitate plates.