An Assessment of the Impact of Protective Lifeline Safety Systems on Formwork Systems

Abstract

Featured Application: Results of tests of safety systems for work at height during the installation of formwork systems. The tests used real formwork systems and climber protection systems. Work related to the installation of formwork and the pouring of concrete involves the need to move on the formwork walls. There is a high risk of falling off the wall and falling during work. It is therefore necessary to use systems that allow for safe work at heights, but also the safety of the formwork systems themselves. This article presents the results of tests under real conditions of a person falling from the formwork. Two safety systems were tested: one based on a pole–rope system with a flexible joint and one based on climbing arrester hooks. The test results showed that the additional forces occurring in the system do not exceed 6.4 kN and that the stresses reach the highest value only at the site of installation of the system and do not exceed the yield strength of the steel used in the formwork structure. The results obtained indicate that during a fall, the fall energy is absorbed so much that there is no damage to the formwork elements, and the highest effort is observed for the formwork arrester hook and reaches 87% of the structure effort. In the case of systems with flexible posts, the maximum load values do not exceed 30% of the structure. The presented results may be useful in designing and planning assembly works and using formwork systems in concrete pouring conditions.