Investigations of zinc recovery from metallurgical waste

Abstract

Approximately 7 million tonnes of zinc is annually used for corrosion protection in processes of continuous galvanization and the hot dip processes. Two types of waste are obtained from the process: zinc ash and hard zinc and each of them constitute around 10% of the feed weight. Paper concerns the method of possible separation of metallic zinc from the non-metallic zinc compounds from the zinc ashes - the waste product of hot dip galvanization process. The investigative programme covered the comminution tests of the feed (zinc ash) in selected crushers: jaw crusher, roller crusher and impactor. Results of investigations show that application of individual crushing device results in various breakage of the feed sample. Impact force caused the highest increase in finest particles size fractions of the product, while metallic and non-metallic fractions were comminuted differently. The compression force, in turn, caused the selective comminution, i.e. the breakage of metallic zinc was observed in a higher degree.