Removal of Lead by Oxidized Graphite

  • Selvanantharajah N
  • Iyngaran P
  • Abiman P
  • et al.
N/ACitations
Citations of this article
7Readers
Mendeley users who have this article in their library.

Abstract

Lead ion adsorption on the surfaces of pristine and oxidized graphite is studied quantitatively using X-ray photoelectron spectroscopy (XPS) and standard electrochemical measurements. The XPS analysis confirmed the oxidation of graphite, yielding a final composite consisting of 15.97% of oxygen and 84.03% of carbon in comparison with the pristine graphite powder consisting of 6.13% oxygen and 93.87% carbon. The adsorption of lead (II) ion was confirmed by the peaks observed at 138 eV and 143.8 eV, associated with the emissions from Pb4f 7/2 and Pb4f 5/2, respectively. The effective concentration of Pb2+ ion and the optimum dosage of oxidized graphite were calculated to be 400 µM and 200 mg, respectively. Adsorption capacity of bare graphite was 41.18%, whereas that of oxidized graphite was 73.3%. The present results show that graphite oxide is a candidate material for the adsorption of Pb2+ ion from water.

Cite

CITATION STYLE

APA

Selvanantharajah, N., Iyngaran, P., Abiman, P., & Kuganathan, N. (2021). Removal of Lead by Oxidized Graphite. C, 7(1), 23. https://doi.org/10.3390/c7010023

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free