High and flat spectral responsivity of quartz tuning fork used as infrared photodetector in tunable diode laser spectroscopy

Abstract

Infrared laser technology over the last decades has led to an increasing demand for optical detectors with high sensitivity and a wide operative spectral range suitable for spectroscopic applications. In this work, we report on the performance of a custom quartz tuning fork used as a sensitive and broadband infrared photodetector for absorption spectroscopy. The photodetection process is based on light impacting on the tuning fork and creating a local temperature increase that generates a strain field. This light-induced, thermoelastic conversion produces an electrical signal proportional to the absorbed light intensity due to quartz piezoelectricity. A finite-element-method analysis was used to relate the energy release with the induced thermal distribution. To efficiently exploit the photo-induced thermoelastic effects in the low-absorbance spectral region of quartz also, chromium/gold layers, acting as opaque surface, have been deposited on the quartz surface. To demonstrate the flat response as photodetectors, a custom tuning fork, having a fundamental resonance frequency of 9.78 kHz and quality factor of 11 500 at atmospheric pressure, was employed as photodetector in a tunable diode laser absorption spectroscopy setup and tested with five different lasers with emission wavelength in the 1.65-10.34 μm range. A spectrally flat responsivity of ∼2.2 kV/W was demonstrated, corresponding to a noise-equivalent power of 1.5 nW/Hz, without employing any thermoelectrical cooling systems. Finally, a heterodyne detection scheme was implemented in the tunable diode laser absorption spectroscopy setup to retrieve the resonance properties of the quartz tuning fork together with the gas concentration in a single, fast measurement.