Computing the stress intensity factor range for fatigue crack growth testing at 20 kHz

Abstract

Inertia and damping influence the values of the stress intensity factors (SIFs) at high-frequency loading and they must be included in computations. In the present study, different dynamic simulation procedures were carried out for two types of specimen geometries and the achieved SIF values were compared. Fast computation procedures such as harmonic modal analysis and direct steady-state analysis were compared to the computationally expensive transient dynamic analysis. Two different methods for calculating the SIF, the J-integral and the crack tip opening displacement (CTOD) methods, were applied and compared and the results showed a near perfect agreement in calculation of the mode I SIF. The Rayleigh damping model was introduced into the dynamic computation to investigate its effect and the results revealed a clear effect on the SIF at 20 kHz frequency. The fast direct steady-state analysis showed good agreement to both harmonic modal and transient analysis with the different damping values used and is, after this study, the recommended procedure.