Abstract
High-electron-mobility polycrystalline Ge (poly-Ge) thin films are difficult to form because of their poor crystallinity, defect-induced acceptors and low solid solubility of n-type dopants. Here, we found that As doping into amorphous Ge significantly influenced the subsequent solid-phase crystallization. Although excessive As doping degraded the crystallinity of the poly-Ge, the appropriate amount of As (~1020 cm−3) promoted lateral growth and increased the Ge grain size to approximately 20 μm at a growth temperature of 375 °C. Moreover, neutral As atoms in poly-Ge reduced the trap-state density and energy barrier height of the grain boundaries. These properties reduced grain boundary scattering and allowed for an electron mobility of 370 cm2/Vs at an electron concentration of 5 × 1018 cm−3 after post annealing at 500 °C. The electron mobility further exceeds that of any other n-type poly-Ge layers and even that of single-crystal Si wafers with n ≥ 1018 cm−3. The low-temperature synthesis of high-mobility Ge on insulators will provide a pathway for the monolithic integration of high-performance Ge-CMOS onto Si-LSIs and flat-panel displays.
Cite
CITATION STYLE
Saito, M., Moto, K., Nishida, T., Suemasu, T., & Toko, K. (2019). High-electron-mobility (370 cm2/Vs) polycrystalline Ge on an insulator formed by As-doped solid-phase crystallization. Scientific Reports, 9(1). https://doi.org/10.1038/s41598-019-53084-7
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.