Test and Theoretical Study on Mechanical Properties of Steel Fiber-Reinforced Bamboo-Reinforced Concrete Slab

Abstract

To enhance the mechanical properties of bamboo-reinforced concrete slabs, 1%, 1.5%, and 2% of steel fibers (SF) were added to C30 bamboo-reinforced concrete slabs to produce two test groups, each containing 12 slabs. One group was tested under static loads, and the other under impact loads. In each group, the slab thickness was set to 50 mm, 65 mm, and 80 mm, and the steel fiber dosages were 0%, 1%, 1.5%, and 2%. While existing studies on bamboo-reinforced concrete slabs (BRCS) have primarily focused on static flexural behavior, and research on steel fiber-reinforced concrete (SFRC) has mainly addressed fiber network effects in plain or steel-reinforced matrices, the synergistic mechanism between bamboo and SF in steel fiber-reinforced bamboo-reinforced concrete slabs (SFRBCS) under dynamic impact loading remains unexplored. This study innovatively combines bamboo’s elastic energy absorption with SF’s plastic energy dissipation. Static load and drop hammer impact tests were carried out in each group to study the mechanical properties of SFRBCS under static and dynamic loads. The test results show that: under static load, adding SF transforms the failure mode of the slab from brittle shear failure to ductile bending failure, increases the ultimate load, and delays the development of the main crack. Under the action of impact loads, bamboo absorbs impact energy through elastic deformation, while SF dissipates energy through plastic deformation. The combined effect of the two significantly slows down the development speed of cracks. The slab with 80 mm thick and 2% SF dosage exhibits excellent impact ductility. Based on theoretical analysis and tests, the corresponding correction coefficients are introduced to establish the bearing capacity calculation model of SFRBCS under uniformly distributed loads, considering the synergistic effect of the mechanical properties of bamboo and the reinforcing effect of SF. The combination of 1.5% SF dosage and 80 mm slab thickness can effectively enhance the material utilization rate (defined as the ratio of the increment in ultimate bearing capacity to the increment in steel fiber dosage). Test and calculation models provide a theoretical basis for the design and application of SFRBCS, which is applicable to engineering fields such as low-rise buildings and temporary structures.