Continuous laboratory gold solvent extraction from cyanide solutions using LIX 79 reagent

17Citations
Citations of this article
16Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Continuous laboratory solvent extraction of gold from cyanide solutions has been investigated by using LIX 79 guanidine-based extractant. Different variables that affected the extraction included aqueous pH, extractant concentration and modifier concentration. Extraction isotherms of the aurocyanide complex with respect to the other cyanoanions were compared, and the following order of selectivity was observed: Au > Ag > Cu > Zn > Fe. According to the pH isotherms, aurocyanide can be extracted in alkaline media, and a better separation with respect to other cyano anions was obtained in the pH range 10.5-11.2. From the McCabe-Thiele diagrams, better recovery was observed when using LIX 79 and tridecanol at 10 vol.-%. Stripping gold from the loaded organic was carried out at pH > 12 by using NaOH and NaCN solutions. The pilot plant tests indicate that a two-stage extraction followed by one strip step are more than adequate to obtain an overall process efficiency of 92 %. However, for those cases where copper is present significantly, a copper wash stage is recommended before gold stripping. In this case, stripping of copper is accomplished at a pH 10.8, whereas the gold stripping was done at a pH of 12.0. © 2007 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cite

CITATION STYLE

APA

Aguayo, S., Valenzuela, J. L., Parga, J. R., Lewis, R. G., & Cruz, M. (2007). Continuous laboratory gold solvent extraction from cyanide solutions using LIX 79 reagent. Chemical Engineering and Technology, 30(11), 1532–1536. https://doi.org/10.1002/ceat.200700202

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free