RP-HPLC stability-indicating method for simultaneous determination of sodium valproate, methylparaben and propylparaben in oral solution

Abstract

A new, sensitive, stability-indicating reversed-phase HPLC method was validated and applied for the simultaneous quantitation of sodium valproate and two paraben preservatives; methylparaben, and propylparaben in the liquid dosage form. Stability tests were carried out through exposure of the analyte's solution to stress conditions. Separation of the analytes was achieved on (waters) C18 Column (150 mm × 3.9 mm, 5 μm). A mixture of 0.05 M monobasic potassium phosphate pH 3.5 and acetonitrile (50:50; v/v) was applied at 1.5 ml/min flow rate and UV detection wavelength at 210 nm. The degradation products and the analytes were completely separated. The linearity was performed in the range of 50-150 % from a target concentration of 10 μg/ml propylparaben, 90 μg/ml methylparaben, and 2.88 mg/ml sodium valproate with a coefficient correlation (R2) 1.0 for methylparaben, propylparaben and sodium valproate. The validation results of the suggested method were in a good agreement with ICH guidelines. Application of the proposed method for analysis of liquid dosage forms was successfully carried out in the routine quality control process.