Assessing the Impact of Rainfall Inputs on Short-Term Flood Simulation with Cell2Flood: A Case Study of the Waryong Reservoir Basin

Abstract

This study explored the impacts of various rainfall input types on short-term runoff simulations using the Cell2Flood model in the Waryong Reservoir Basin, South Korea. Six types of rainfall data were assessed: on-site gauge measurements, spatially interpolated data from 39 Automated Synoptic Observing System (ASOS) and 117 Automatic Weather System (AWS) stations using inverse distance weighting (IDW), and Hybrid Surface Rainfall (HSR) data from the Korea Meteorological Administration. The choice of rainfall input significantly affected model accuracy across the three rainfall events. The point-gauged ASOS (P-ASOS) data demonstrated the highest reliability in capturing the observed rainfall patterns, with Pearson’s r values of up to 0.84, whereas the radar-derived HSR data had the lowest correlations (Pearson’s r below 0.2), highlighting substantial discrepancies. For runoff simulation, the P-ASOS and ASOS-AWS combined interpolated dataset (R-AWS) achieved relatively accurate predictions, with P-ASOS and R-AWS exhibiting Normalized Peak Error (NPE) values of approximately 0.03 and Peak Time Error (PTE) within 20 min. In contrast, the HSR data produced large errors, with NPE up to 4.66 and PTE deviations exceeding 200 min, indicating poor temporal accuracy. Although input-specific calibration improved performance, significant errors persisted because of the inherent uncertainty of rainfall data. These findings underscore the importance of selecting and calibrating appropriate rainfall inputs to enhance the reliability of short-term flood modeling, particularly in ungauged and data-sparse basins.