Water level and wave height estimates at NOAA tide stations from acoustic and microwave sensors

Abstract

The National Oceanic and Atmospheric Administration (NOAA) is transitioning the primary water level sensor at the majority of tide stations in the NationalWater Level Observation Network (NWLON) from an acoustic ranging system to a microwave radar system. Field comparison of the acoustic and microwave systems finds statistically equivalent performance when temperature gradients between the acoustic sensor and water surface are small and when significant wave height is less than roughly 0.5 m. When significant wave height is greater than approximately 0.5-1 m, the acoustic system consistently reports lower water levels. An analysis of 2 months of acoustic and microwave water level data at Duck, North Carolina, finds that the majority of differences between the two sensors can be attributed to systemic errors in the acoustic system and that the microwave system captures water level variability with higher fidelity than the acoustic system. NWLON real-time data products include the water level standard deviation, a statistic that can serve as a proxy for significant wave height. This study identifies 29 coastal water level stations that are candidates for monitoring wave height based on water level standard deviation, potentially adding a significant source of data for the sparsely sampled coastal wave fields around the United States, and finds that the microwave sensor is better suited than the acoustic system for wave height estimates.