Healing microstructures of experimental and natural fault gouge

Abstract

The healing of fault gouge was studied by examining microstructures of naturally and experimentally produced granitoid fault rock. We performed deformation experiments on intact granitoid rock samples at T = 300-500°C, Pc = 500 MPa, and ε̊ = 1.2 × 10-4- 1.3 × 10-7 s-1 with 0.2 wt% H2O added. Healing experiments were carried out on deformed samples at T = 200-500°C, Pc = 500 MPa, for 4 h to 14 days under hydrostatic and nonhydrostatic conditions. The grain size distributions (GSD) of the deformed samples were quantified using the D> value (slope of log(frequency) -log(radius) of the GSD) for quartz and feldspar fault gouge. Healing causes a decrease in the D> value from >2.0 to ∼1.5. The time dependence of the D> decrease is described by a hydrostatic healing law of the form ΔD = D>(t) - Df = A. e(-λ.t). The results of the laboratory experiments were compared to three natural fault systems, (1) Nojima Fault Zone (Japan), (2) fault zones in the Black Forest (Germany), and (3) Orobic Thrust (Italian Alps). Natural and experimental gouges have similar D> values. Healing is only observed in monomineralic aggregates; polymineralic (i.e., mixed) fault gouges retain their high D> value after extended healing times because grain growth is inhibited. Healing under nonhydrostatic conditions is more rapid than hydrostatic healing. The low strain rates, which were measured during nonhydrostatic healing, are temperature-dependent and suggest that diffusive mass transfer processes take place during deformation. Thus, fault rocks at upper to midcrustal depth may deform by combined cataclasis and diffusive mass transfer. Copyright 2008 by the American Geophysical Union.