Experimental-Numerical Investigation of a Steel Pipe Repaired with a Composite Sleeve

Abstract

Pressure vessels are subjected to deterioration and damage, which can significantly reduce their strength and loading capabilities. Among several procedures nowadays available to repair damaged steel pipelines, composite-repairing systems have become popular over the past few years to restore the loading capacity of damaged pipelines. This study reports a numerical-experimental investigation performed for a composite-repaired pipeline made of API 5L X60 steel. An experimental burst test was carried out on a 4 m long pipe section, closed by two lateral caps, and tested up to failure by means of high-pressure water. In parallel, the test was numerically replicated through a FEM model of the composite-repaired steel tank, allowing for a cross-comparison of results. It was found that the composite repairing system has almost eliminated both the noteworthy thickness reduction of 80% and the related stress concentrations in the pipe body. These outcomes allow for a better understanding of these repairing procedures in order to drive their subsequent optimization.