Effect of EGR on performances and emissions of DI Diesel engine fueled with waste plastic oil: CDF approach

Abstract

Recently, there is an increasing interest in the pyrolysis of waste plastic into usable fuel as a friendly environment method for waste plastic disposal. The existing literature from various studies stated that the major problem related to the use of WPO in diesel engines is the high NOx emissions level. This paper aims to remedy this problem by suggesting the best EGR percentage with the advanced optimum injection timing. Primary, 5 EGR percentage fractions are considered: 0%, 5%, 15%, 20% and 25% percent. The results showed that 25% is the best percentage regarding emissions. However, a significant reduction in mean in-cylinder pressure, temperature, and heat release rate was depicted with the EGR fraction increase. Injection timing is advanced to recoup the decrease in performance. The results showed that 25% of EGR and advanced injection timing by 5 degrees would be better for performances and emissions of DI diesel engine while running with waste plastic oil as an alternative fuel.