Textile pressure sensor made of flexible plastic optical fibers

181Citations
Citations of this article
207Readers
Mendeley users who have this article in their library.

Abstract

In this paper we report the successful development of pressure sensitive textile prototypes based on flexible optical fibers technology. Our approach is based on thermoplastic silicone fibers, which can be integrated into woven textiles. As soon as pressure at a certain area of the textile is applied to these fibers they change their cross section reversibly, due to their elastomeric character, and a simultaneous change in transmitted light intensity can be detected. We have successfully manufactured two different woven samples with fibers of 0.51 and 0.98 mm diameter in warp and weft direction, forming a pressure sensitive matrix. Determining their physical behavior when a force is applied shows that pressure measurements are feasible. Their usable working range is between 0 and 30 N. Small drifts in the range of 0.2 to 4.6%, over 25 load cycles, could be measured. Finally, a sensor array of 2 x 2 optical fibers was tested for sensitivity, spatial resolution and light coupling between fibers at intersections. © 2008 by the authors; licensee Molecular Diversity Preservation International.

Cite

CITATION STYLE

APA

Rothmaier, M., Luong, M. P., & Clemens, F. (2008). Textile pressure sensor made of flexible plastic optical fibers. Sensors, 8(7), 4318–4329. https://doi.org/10.3390/s8074318

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free