Utilization of Banana (Musa sapientum) Peel for Removal of Pb2+ from Aqueous Solution

Abstract

Biosorption is a convenient process for heavy metal remediation. In this study, banana peel was experimented to eliminate lead (Pb2+ ) from an aqueous solution following batch experiments. The functional groups of banana peel were identified by Fourier-transform infrared spectroscopy (FTIR). The adsorption mechanism was studied by the Langmuir and Freundlich adsorption iso-therm model and determined the separation factor from the Langmuir adsorption isotherm. The adsorption of Pb2+ on dried banana peel had been studied at different adsorbent doses, pH, initial concentration of Pb, contact time, temperature, and agitation speed. After adsorption, Pb2+ was measured using atomic absorption spectroscopy (AAS). Maximum adsorption had taken place at pH 5 for adsorbent dose 45 g L-1 . The optimum contact time and agitation speed was 30 minutes and 150 rpm, respectively for the initial Pb concentration of 100 ppm at 25°C. Both, Langmuir and Freundlich adsorption isotherm models shows the best fitting (r2 = 0.9978 and 0.9595) for Pb2+ adsorption. The maximum Pb2+ adsorption capacity was 2.1 mg g-1 . The findings indicate that the banana peel waste could be a potential adsorbent for heavy metal removal. Moreover, the waste management problem could be solved in an eco-friendly manner by utilizing it for the eradication of Pb2+ from wastewater.