Studies on fast triggering and high precision tracking with Resistive Plate Chambers

10Citations
Citations of this article
9Readers
Mendeley users who have this article in their library.
Get full text

Abstract

We report on studies of fast triggering and high precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV/c muon beam at CERN using glass RPCs with gas gaps of 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores precision tracking and triggering capabilities. RPC signals were acquired with precision timing and charge integrating readout electronics at both ends of the strips. The time resolution was measured to be better than 600 ps and the average spatial resolution was found to be 220μm using charge information and 287μm only using signal arrival time information. The dual-ended readout allows the determination of the average and the difference of the signal arrival times. The average time was found to be independent of the incident particle position along the strip and is useful for triggering purposes. The time difference yielded a determination of the hit position with a precision of 7.5 mm along the strip. These results demonstrate the feasibility using RPCs for fast and high-resolution triggering and tracking. © 2013 Elsevier B.V.

Cite

CITATION STYLE

APA

Aielli, G., Ball, R., Bilki, B., Chapman, J. W., Cardarelli, R., Dai, T., … Zhu, J. (2013). Studies on fast triggering and high precision tracking with Resistive Plate Chambers. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 714, 115–120. https://doi.org/10.1016/j.nima.2013.02.044

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free