Tungsten matrix composite reinforced with cocrfemnni high-entropy alloy: Impact of processing routes on microstructure and mechanical properties

Abstract

Tungsten heavy alloy composite was developed by using novel CoCrFeMnNi high-entropy alloy as the binder/reinforcement phase. Elemental tungsten (W) powder and mechanically alloyed CoCrFeMnNi high-entropy alloy were mixed gently in high energy ball mill and consolidated using different sintering process with varying heating rate (in trend of conventional sintering < microwave sintering < spark plasma sintering). Mechanically alloyed CoCrFeMnNi high-entropy alloy have shown a predominant face-centered cubic (fcc) phase with minor Cr-rich σ-phase. Consolidated tungsten heavy high-entropy alloys (WHHEA) composites reveal the presence of Cr–Mn-rich oxide phase in addition to W-grains and high-entropy alloys (HEA) phase. An increase in heating rate restricts the tungsten grain growth with reduces the volume fraction of the Cr–Mn-rich phase. Finally, spark plasma sintering with a higher heating rate and shorter sintering time has revealed higher compressive strength (~2041 MPa) than the other two competitors (microwave sintering: ~1962 MPa and conventional sintering: ~1758 MPa), which may be attributed to finer W-grains and reduced fraction of Cr–Mn rich oxide phase.