Thin-film organic photodiodes as integrated detectors for microscale chemiluminescence assays

138Citations
Citations of this article
67Readers
Mendeley users who have this article in their library.
Get full text

Abstract

We report the use of thin-film organic photodiodes as integrated optical detectors for microscale chemiluminescence. The copper phthalocyanine-fullerene (CuPc-C60) small molecule photodiodes have an external quantum efficiency of ∼30% at 600-700 nm, an active area of 2 mm × 8 mm and a total thickness of ∼2 mm. Simple detector fabrication, based on layer-by-layer vacuum deposition, allows facile integration with planar chip-based systems. To demonstrate the efficacy of the approach, CuPc-C 60 photodiodes were used to monitor a peroxyoxalate based chemiluminescence reaction (PO-CL) within a poly(dimethylsiloxane) (PDMS) microfluidic device. Optimum results were obtained for applied reagent flow rates of 25 μL/min, yielding a CL signal of 8.8 nA within 11 min. Reproducibility was excellent with typical relative standard deviations (R.S.D.) below 1.5%. Preliminary quantitation of hydrogen peroxide yielded a detection limit of ∼1 mM and linearity over at least three decades. With improved sensitivity and when combined with enzymatic assays the described integrated devices could find many applications in point-of-care diagnostics. © 2004 Elsevier B.V. All rights reserved.

Cite

CITATION STYLE

APA

Hofmann, O., Miller, P., Sullivan, P., Jones, T. S., Demello, J. C., Bradley, D. D. C., & Demello, A. J. (2005). Thin-film organic photodiodes as integrated detectors for microscale chemiluminescence assays. Sensors and Actuators, B: Chemical, 106(2), 878–884. https://doi.org/10.1016/j.snb.2004.10.005

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free