Reduction in the contact time of droplet impact on superhydrophobic surface with protrusions

Abstract

Previous studies have pointed out that adding a single protrusion on the superhydrophobic surface can effectively reduce the contact time of droplets, which is of practical importance in applications like anti-icing, self-cleaning, and anti-frost. However, the droplet impact dynamics and the mechanism for contact time reduction are still far from completely understood. Therefore, in this paper, via a three-dimensional pseudopotential lattice Boltzmann model coupled with a modified curved boundary scheme (which satisfies mass conservation), the droplet impact dynamics is simulated in a wide range of Weber numbers (0 < We ≤ 67.7), protrusion size (10 ≤ W ≤ 30), and protrusion shape (triangle, square, and circle), with particular interest in understanding their effects on the contact time. We demonstrate that the variation of contact time depends on the bouncing type as well as the retraction way. Among three possible bouncing types observed in the simulation, including non-break bouncing, two droplets bouncing, and three droplets bouncing, two droplets bouncing has less contact time and could be facilitated by increasing We and using triangle protrusion. However, with increasing of W or using square protrusion, the bouncing type may change from two droplets bouncing to three droplets bouncing, and the deformation of fragments may become definitely different, leading to a long contact time. In addition, a transition from twice-retraction to once-retraction can be obtained by increasing We or making the protrusion shape sharp. When the fragments resulting from droplet splitting only retract once on the bottom wall, the contact time can be effectively reduced.