Desenvolvimento dos parâmetros do processo de soldagem por atrito com pino não consumível para o aço de alta resistência e baixa liga ISO 3183 X80Ma

Abstract

It is known that welding and rotational speeds, axial force, the inclination angle, and the tool design are the main independent input variables which are used to control the process of friction stir welding, and the heat generation rate and cooling, force in the welding direction and torque are the response variables that will change the microstructural evolution and mechanical performance of the welded joint. In this work, the behavior of these input and response variables aiming the development of friction stir welding process applied to steel API 5L X80 (ISO 3183 X80M) steel were studied. For this purpose, plates with 12 mm thick were welded by two passes using polycrystalline cubic bore nitrite tool. It was observed that, while keeping the welding speed constant, an increase in spindle speed and /or axial force, tends to reduce the reactive forces and the torque acting during the process by increasing of the heat generation rate. Otherwise, keeping spindle speed and axial force constants, the welding speed rising the forces and torque, allowing the welding speed plays a significant role in the heat generation rate during the process.